BITUMEN
EMULSION

Fogspray Emulsions

A fog spray is a light application of diluted bitumen emulsion that is applied as a maintenance procedure on an existing bituminous surfacing to assist in retaining the aggregates in place, sealing the layer against water ingress or to “rejuvenate” the surfacing when it is showing signs of “dryness” resulting from ageing/hardening of the bitumen.

CRS60

Low viscosity cationic rapid-set bitumen emulsion.

Download product data for CRS60

SS60 STAB

Low viscosity anionic slow set bitumen emulsion. Diluted with water it is applied onto aged seals as an enrichment spray or as a tack coat for an asphalt overlay.

Download product data

Coatseal QDF

A quick drying anionic modified emulsion used for fog spray.

Download product data

Bond Coats

A bond coat is a spray application of bitumen emulsion. It is applied to an existing asphalt or concrete surface prior to a new asphalt overlay or patching. This eliminates slippage planes and provides a better bond between new and existing pavement layers.

SS60

Low viscosity anionic slow set bitumen emulsion. Diluted with water it is applied onto aged seals as an enrichment spray or as a tack coat for an asphalt overlay.

Download product data

Coltack L / HL

A cationic spray grade bitumen emulsion modified with SBR latex. Mainly used for spraying as a bond coat when using integrated paver/spraying machines.

Download product data

Colbond N

A medium viscosity cationic spray grade bitumen emulsion modified with SBR latex and special additives to warrant enhanced bond strength properties with substrate.

Download product data

Tack Coats

CRS60 / 65 / 70

Cationic rapid-set bitumen emulsion mainly used as a tack coat or penetration spray in the construction of single, double or Cape seals. It is favoured over hot binders when resealing roads in cold/wet climates.

Download product data CRS60

Download product data CRS65

Download product data CRS70

Rubspray 65/3 (SC-E1) & 65/5 (SC-E2)

A medium viscosity cationic spray grade bitumen emulsion modified with 3% or 5% net SBR latex. Mainly used in cold/wet climates for resealing roads with surface cracks without pre-treatment.

Download product data Rubspray 65/3 (SC-E1)

Download product data Rubspray 65/5 (SC-E2)

Rubspray 70/3 (SC-E1) and 70/5 (SC-E2)

A high viscosity cationic spray grade bitumen emulsion modified with 3% or 5% net SBR latex. Mainly used in cold/wet climates for resealing roads with surface cracks without pre-treatment.

Download product data Rubspray 70/3 (SC-E1)

Download product data Rubspray 70/5 (SC-E2)

Primes

Bituminous priming materials are low viscosity binders that have the ability to penetrate crushed stone, natural gravel and cement or lime stabilised base course materials.

Colprime E

A non-flammable, low viscosity emulsion prime with reduced drying time, formulated with a special blend of Colas emulsifiers.

Download product data

MC30

A blend of medium curing petroleum solvents and penetration grade bitumen. Used for priming newly constructed, crushed stone- or natural gravel base courses prior to surfacing.

Download product data

MSP1

An inverted bitumen emulsion manufactured from bitumen and a cutback medium. Specially designed as a prime for non-bituminous bases prior to surfacing.

The product is ideal for priming:

  • Natural gravel, crushed stone and stabilized bases.
  • Small areas by hand sprayer.
  • Damp bases and during inclement weather.

Download product data

Slurry Emulsions

SS60

A low viscosity anionic slow set bitumen emulsion. Mainly used as a cold applied binder for the manufacture of slow set slurry mixtures which can be batch mixed and applied by hand or with a continuous mix and lay machine.

Download product data

SS60MOD

Slow set anionic stable grade bitumen emulsion modified with SBR latex. Used for the manufacture of machine- or hand applied slurry mixtures in areas where traffic accommodation is not a problem. It is also often used to bond geotextile materials to cracked road surfaces.

Download product data

Colmat L (AC-E1)

A specially formulated quick set cationic microsurfacing bitumen emulsion modified with SBR latex for mixing with selected continuously graded crushed aggregate, cement and water by means of a purposely design slurry machine.

Download product data

Colpave

A specially formulated medium set cationic microsurfacing bitumen emulsion modified with SBR latex for mixing with selected continuously graded crushed aggregate, cement and water. COLPAVE™ emulsion is specially formulated for mixing in a concrete mixer and applying by hand.

Download product data

Colrut (AC-E2)

A specially formulated quick set cationic microsurfacing bitumen emulsion modified with SBR latex for mixing with selected coarse graded crushed aggregate, cement and water. These raw materials are mixed and applied with a purpose designed machine and augured rut filling box.

Download product data

Coldmix Emulsions

CMS60 / 65

A low viscosity cationic medium set bitumen emulsion used for the manufacture of cold asphalt mixes. CMS 60/65 is ideal for manufacturing cold asphalt mixes by hand.

Download product data CMS60

Download product data CMS65

MS250

A specially formulated medium set anionic premix grade bitumen emulsion for the manufacture of cold asphalt mixes in a hotmix asphalt plant.

Download product data

Stabilisation Grade Emulsions

SS60STAB

A low viscosity anionic slow-set bitumen emulsion used as a cold stabilisation agent in emulsion treated bases(ETB).

Download product data

CSS60

A low viscosity cationic slow-set bitumen emulsion

Download product data